TARC Supplies
The American Rocketry Challenge (TARC) is an annual rocketry contest for youth in grades 6 through 12. Teams compete each year for hundreds of thousands of dollars in scholarships, and a chance to travel to the Paris Air Show to compete for the United States! The challenge is different each year, but Rocketry Works has the supplies you'll need to succeed!
- Adhesives
- Bulkheads
- Centering Rings
- Fins and Fin Material
- Nose Cones
- Recovery Gear
- Tools
- Transitions
- Tubes
-
3D Printed PNC-60KS Altimeter Bay Nose Cone
Rocketry Works
$5.99This nose cone is an 4.15 inch (10.5 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone with vents for accurate barometric altimeter measurements--the shoulder and nose cone separate with quick release plastic...RW-PNC-60KS-ALT$5.99 -
1/4 inch thick Custom Centering Rings (per ring)
Rocketry Works
$7.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is no larger...RW-CR-CUSTOM-1-4$7.99 -
1/8 inch thick Custom Centering Rings (per ring)
Rocketry Works
$5.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is less than 3...RW-CR-CUSTOM-1-8$5.99 -
Custom 3D Printed Nose Cone
Rocketry Works
$8.99Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009RW-PNC-CUSTOM$8.99 -
Flexible Foam Egg Protector for BT-70
Rocketry Works
$8.99Protect fragile egg payloads with these lightweight flexible foam paylaod protectors. The egg-shaped cavity in the middle fits eggs matching the TARC egg specification perfectly, and the equatorial access reduces time to load and unload vertically...RW-PP-BT-70-FLEX-FOAM$8.99 -
Flexible Foam BT-70 Nose Cone
Rocketry Works
$8.99Ideal for egg lofting and TARC models, this flexible foam BT-70 nose cone features a smooth finish, and it helps absorb the impact of landing a fragile payload. The foam material in this nose cone is is highly compressible, providing superior cushioning...RW-NC-BT-70-FLEX-FOAM$8.99 -
Custom Centering Rings (per ring)
Rocketry Works
$5.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is less than 3...RW-CR-CUSTOM$5.99 -
Flexible Foam Egg Protector for BT-80
Rocketry Works
$8.99Protect fragile egg payloads with these lightweight flexible foam paylaod protectors. The egg-shaped cavity in the middle fits eggs matching the TARC egg specification perfectly, and the equatorial access reduces time to load and unload vertically...RW-PP-BT-80-FLEX-FOAM$8.99 -
Double-sided Self Healing Cutting Mat 8.5 x 12 inches
Excel
$8.59This medium format double-sided self healing cutting mat is a good size for everyday use on the dining room table or workshop, providing a smooth, flexible yet stable cutting platform that prevents damage to any underlying surface. The tough green top...EXC-60002$8.59 -
Double-sided Self Healing Cutting Mat 5.5 x 9 inches
Excel
$5.49This small format double-sided self healing cutting mat is a perfect size to store in a field box for use at the launch site, providing a smooth, flexible yet stable cutting platform that prevents damage to any underlying surface. The tough green top and...EXC-60000$5.49 -
TARC Tube Cutting Guides
Rocketry Works
$7.99Making straight perpendicular cuts in typical TARC sized tubes is easy with the Rocketry Works Tube Cutting Guides. This set of 4 guides fits tubes commonly used in TARC: 24mm or 29mm motor tubes, and BT-70 or BT-80 body tubes. Just slide the...RW-TARC-TUBE-CUT-GUIDES$7.99 -
Plywood Trapezoidal Fins TTW fits 24mm in BT-70 (Set of 3)
Rocketry Works
$7.99Save yourself the trouble of cutting your own plywood fins with thee sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on landing better than any other type of fin, since they are tucked up...RW-24MM-BT-70-TTW-3MM-TRAP-FIN$7.99