Launch Pad Spare Parts
Replacement parts for Rocketry Works launch pad equipment
-
3 Way Combination Launch Rod Mount for 1010 Rail Pad
Rocketry Works
$9.99Designed to support multiple common launch rod sizes in Rocketry Works' Wallops Island 1010 rail launch pad, this 3D printed adapter supports 1/8 inch, 3/16 inch, and 1/4 inch launch rods so you can launch rockets that lack rail guides from your Wallops...RW-COMBO-ROD-MNT-1010$9.99 -
Launch Rod Safety Cap
Rocketry Works
$0.99Rocketry Works designed our 3D printed launch rod safety caps to be durable and they're made of easy to see colors that are easy to spot when dropped on the ground. Use them to cover the top of your launch rods when you are not launching to protect...RW-LRC$0.99 -
1010 Launch Rail Stand-off
Faztek
$3.50This small and simple accessory for a 1010 launch rail provides support for a model on the rail to keep it off the blast deflector. Just attach the stand-off to the rail a few inches from the bottom of the rail, and most rockets can rest on the...RW-LG-CORNER-BRACKET-2-1010$3.50 -
Steel Blast Deflector 16 Gauge (1/16 inch)
Rocketry Works
$5.99Unlike many blast deflectors you'll find out there, Rocketry Works' steel blast deflectors are sturdy stock. Made in America of solid steel, we designed these plates to be strong enough to sustain not just the heat of many low power flights, but also the...RW-LG-BD-16$5.99 -
Steel Blast Deflector 20 Gauge (1/32 inch)
Rocketry Works
$5.49Unlike many blast deflectors you'll find out there, Rocketry Works' steel blast deflectors are sturdy stock. Made in America of solid steel, we designed these plates to be strong enough to sustain not just the heat of many low power flights, but also the...RW-LG-BD-20$5.49 -
Blast Deflector Stand Off
Rocketry Works
$0.99Rocketry Works' blast deflector mount works with both Rocketry Works and Estes blast deflectors, and it features a flared top to keep rockets off the blast deflector plate while on the pad. While the PLA material used in its construction resists the heat...RW-LG-BDSO$0.99 -
1/8 Inch Launch Rod Mount
Rocketry Works
$2.49Rocketry Works launch pads are all compatible with this launch rod mount. While the PLA material used in its construction resists the heat of many low power rocket launches, these do wear out over time. All launch rod mounts used in Rocketry Works...RW-LG-LRM-1/8$2.49 -
3/16 Inch Launch Rod Mount
Rocketry Works
$2.49Rocketry Works launch pads are all compatible with this launch rod mount. While the PLA material used in its construction resists the heat of many low power rocket launches, these do wear out over time. All launch rod mounts used in Rocketry Works...RW-LG-LRM-3/16$2.49 -
1/4 Inch Launch Rod Mount
Rocketry Works
$2.49Rocketry Works launch pads are all compatible with this launch rod mount. While the PLA material used in its construction resists the heat of many low power rocket launches, these do wear out over time. All launch rod mounts used in Rocketry Works...RW-LG-LRM-1/4$2.49 -
1/4 Inch Blast Deflector Stand Off
Rocketry Works
$0.99Rocketry Works' blast deflector mount works with both Rocketry Works and Estes blast deflectors, and it features a flared top to keep rockets off the blast deflector plate while on the pad. While the PLA material used in its construction resists the heat...RW-LG-BDSO-1/4$0.99 -
3/16 Inch Blast Deflector Stand Off
Rocketry Works
$0.99Rocketry Works' blast deflector mount works with both Rocketry Works and Estes blast deflectors, and it features a flared top to keep rockets off the blast deflector plate while on the pad. While the PLA material used in its construction resists the heat...RW-LG-BDSO-3/16$0.99 -
Out of Stock
1515 Launch Rail Stand-off
Faztek
$4.99This simple accessory for a 1515 launch rail provides support for a large model on the rail to keep it off the blast deflector. Just attach the stand-off to the rail a about a foot from the bottom of the rail to support the rocket on the rail where...RW-LG-RAIL-STOP-1515$4.99