Rocketry Works

Yes, we call it Dog Barf.  And it's the cheapest way to protect your recovery device from the rocket motor's hot ejection gasses. In truth, it is commercially available cellulose housing...

We'll cut your custom plywood centering rings for you!  Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the...

This one piece 1/4 inch x 48 inch steel launch rod is ideal for mid power rockets powered by E motors or higher.  For these larger models, ensuring that the rocket is up to stable flight speed...

We'll cut your custom plywood centering rings for you!  Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the...

This one piece steel launch rod is the basis for a reliable and durable launch pad, and is best suited for small model rockets powered by motors up to C power. One piece, solid steel construction...

Rail buttons, used with a launch rail, provide superior guidance while a mid to high power rocket accelerates to safe flight speed so the fins can guide the model in flight. Rocketry works' rail...

Safely recharge your sealed lead-acid type battery with this trickle charger. Just connect the red battery clip to the positive terminal and the black clip to the negative terminal, and the charger...

Rocketry Works' 3D printed motor adapter is a simple way to fly 24mm motors in a 29mm motor tube. Just insert the motor into one half of the motor adapter, and add the included motor spacer tube if...

These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 24mm motor tube in a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to...

These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 24mm motor tube in a 66mm (BT-80) airframe tube. Rocketry Works' unique perforation pattern allows users to...

These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 24mm motor tube in a 98mm (BT-101) airframe tube. Rocketry Works' unique perforation pattern allows users to...

These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 29mm motor tube in a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to...