Bob Smith Industries

Pocket CA is intended for mobile use--in a field box or other places a bottle may leak. These bottles feature a screw-top lid with a pin that plugs the bottle to help prevent clogging the nozzle or...

BSI's Quick-Cure™ Epoxy is is a fast curing epoxy with a brief 5 minute working time. It sets up quickly, which is great for applications that do not require a large area to be applied at once...

The 30 minute working time of BSI's Slow-Cure™ Epoxy is perfect for large projects that require a lot of epoxy over a large area, so long working time is helpful.  This is also the...

These handy extender tips for BSI's CA Glue bottles allow for precision application of small amounts of CA glue right where you need them. This tip can be used with all thicknesses of BSI CA glues...

Foam-Cure is a silicone based adhesive for EPO and EPP foams. It cures clear and slightly flexible, but it does not bond instantly like CA glues. There is also no accelerator for this adhesive. ...

These eyedropper-shaped CA glue applicators come in 2 sizes, depending on the viscosity of the CA glue.  The Regular Tip is suitable for gap filling or  extra-thick CA glues, while the Fine...

Super-Gold is a thin viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues...

When  you need to remove hardened Cyanoacrylate glue, BSI's Uncure debonder is the go to product. In its easy to dispense bottles, you can deliver the right amount to break down these...

This is the Goldilocks Momma Bear of BSI's 5-15-30 minute epoxy lineup, giving a moderate working time of approximately 10-15 minutes before it cures, which gives enough time to apply to a moderate...

Insta-Cure+ is a medium viscosity CA glue that is good for filling loose fitting joints that require the adhesive to bridge gaps.   It produces a strong bond in a very controllable bead,...

Insta-Set CA Glue Accelerator is a catalyst that sets CA glues within 6 to 8 seconds, helping to minimize dripping of CA glue from surfaces you are gluing.  The accelerated bond is just as...

Super-Gold+ is a gap filling, medium viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than...