Tubes

Rocketry Works can cut tubes for you to any length less than 34 inches, and we can optionally cut 3 or 4 1/8 inch slots in the airframe to your specifications.

Rocketry Works has discontinued its thin wall 29mm motor tube.  We recommend using the thicker walled LOC 29mm motor tube. This matte finish 29mm body tube is suitable for 29mm airframes or motor mounts, and it adheres well to white glue, wood glue,...

This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...

This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...

This matte finish 24mm body tube is suitable for 24mm airframes or motor mounts, and it adheres well to white glue, wood glue, CA glue, or epoxy, and pencil and pen both mark it easily.  The 34 inch length ships inexpensively in USPS mailing tubes,...