Adhesives

These reusable epoxy cups are great for mixing the small amounts of epoxy typical in hobby projects. Clear sides and volume markings on the side wall allow easy measurement of the 2 epoxy parts. It is also easy to weigh epoxy constituents on a gram scale...

This is the Goldilocks Momma Bear of BSI's 5-15-30 minute epoxy lineup, giving a moderate working time of approximately 10-15 minutes before it cures, which gives enough time to apply to a moderate surface area or to adjust parts for proper alignment...

Pocket CA is intended for mobile use--in a field box or other places a bottle may leak. These bottles feature a screw-top lid with a pin that plugs the bottle to help prevent clogging the nozzle or leaking. The screw top cap and pin make the nozzle tip...

BSI's Quick-Cure™ Epoxy is is a fast curing epoxy with a brief 5 minute working time. It sets up quickly, which is great for applications that do not require a large area to be applied at once.  Its rated bond strength after its 15 minute full...

The 30 minute working time of BSI's Slow-Cure™ Epoxy is perfect for large projects that require a lot of epoxy over a large area, so long working time is helpful.  This is also the strongest of BSI's 5-15-30 minute series, able to produce...

These wooden stir sticks are perfect for mixing 2 part epoxies in Rocketry Works mixing cups. Measuring 1.4 x 3/8 x 1/12 inch, they are your classic popsicle sticks. Reusable for a time, then disposable. Includes 100 wooden stir sticks.

Insta-Set CA Glue Accelerator is a catalyst that sets CA glues within 6 to 8 seconds, helping to minimize dripping of CA glue from surfaces you are gluing.  The accelerated bond is just as strong as a traditional bond, but you don't need to wait for...

When  you need to remove hardened Cyanoacrylate glue, BSI's Uncure debonder is the go to product. In its easy to dispense bottles, you can deliver the right amount to break down these super-strong bonds--whether you're working on paper, wood, or...