Mid-Cure 15 Minute Epoxy
- Usually Ships within 24 hours
This is the Goldilocks Momma Bear of BSI's 5-15-30 minute epoxy lineup, giving a moderate working time of approximately 10-15 minutes before it cures, which gives enough time to apply to a moderate surface area or to adjust parts for proper alignment. The bond strength of Mid-Cure™ epoxy is rated at 3,800 PSI after its 2-3 hour full cure time. This is BSI's most flexible epoxy, which makes it good for applications subject to high vibration.
Apply Mid-Cure™ epoxy in temperatures above 65 degrees Fahrenheit, to clean, textured surfaces. Sand and clean any smooth, non-porous surfaces like plastic or fiberglass before applying epoxy, or the epoxy may not bond adequately to the smooth surface. Isopropyl alcohol is an excellent solvent to clean any areas with uncured epoxy, but once this epoxy hardens, a Dremmel or other power tool is likely the only way you'll remove it effectively.