Launch Rails
Launch Rails provide superior guidance for rockets as they accelerate to stable flight speed. Mid and high power rockets should use launch rails to avoid the unpredictability of "rod whip" that can cause rockets to take unsafe trajectories.
-
Out of Stock
6 foot 1515 Launch Rail
Faztek
$58.99The 1515 launch rail is necessary only for large L2 or L3 models weighing more than 30 lbs pad weight. This 6 foot section is suitable for extending other 1515 rail sections with Rocketry Works' 1515 Rail Joint (available separately), but is likely...RW-LG-RAIL-1515X72IN$58.99 -
3 Way Combination Launch Rod Mount for 1010 Rail Pad
Rocketry Works
$9.99Designed to support multiple common launch rod sizes in Rocketry Works' Wallops Island 1010 rail launch pad, this 3D printed adapter supports 1/8 inch, 3/16 inch, and 1/4 inch launch rods so you can launch rockets that lack rail guides from your Wallops...RW-COMBO-ROD-MNT-1010$9.99 -
Replacement 1/4-20 Button Head Socket Cap Bolt
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rails. Contains one 1/4-20 x 3/4" button head socket cap screw. Requires 5/32 hex (Allen) wrench.RW-LG-1010-BOLT$0.99 -
Replacement 1/4-20 Flanged Button Head Socket Cap Bolt
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rails. Contains one 1/4-20 x 3/4" flanged button head socket cap screw. Requires 5/32 hex (Allen) wrench.RW-LG-1010-FLANGED-BOLT$0.99 -
Replacement Economy T-nut for 1010 Rail
Rocketry Works
$0.79Replacement T-nut for Rocketry Works' 1010 rails. Includes one economy T-nut to anchor 1/4-20 bolts in the groove of a 1010 rail.RW-LG-1010-ECON-T-NUT$0.79 -
1010 Launch Rail Stand-off
Faztek
$3.50This small and simple accessory for a 1010 launch rail provides support for a model on the rail to keep it off the blast deflector. Just attach the stand-off to the rail a few inches from the bottom of the rail, and most rockets can rest on the...RW-LG-CORNER-BRACKET-2-1010$3.50 -
Out of Stock
1010 4 Hole Gusset Angle Bracket
Faztek
$5.99The 4 hole gusset angle bracket is as wide as a 1010 rail, and requires two 1/4-20 socket cap bolts and two T-nuts to mount to a 1010 rail on 1 side. If you need more support than a smaller, 2 hole corner bracket, this is a sturdy 90 degree angle bracket,RW-LG-4-HOLE-GUSSET-CORNER-BRACKET-1010$5.99 -
Out of Stock
1515 Launch Rail Stand-off
Faztek
$4.99This simple accessory for a 1515 launch rail provides support for a large model on the rail to keep it off the blast deflector. Just attach the stand-off to the rail a about a foot from the bottom of the rail to support the rocket on the rail where...RW-LG-RAIL-STOP-1515$4.99 -
Out of Stock
2 piece 8 foot 1010 Launch Rail
Faztek
$84.99This 1010 launch rail combines two 4-foot rails to create a full 8 foot 1010 launch rail for mid and high power rockets that require more guidance. Since an 8 foot rail is cumbersome to transport, this launch rail comes in two 4 foot pieces, joined...RW-LG-RAIL-1010X96IN-2-PIECE$84.99 -
Out of Stock
1010 Launch Rail 6 ft
Faztek
$39.99The 6 foot 1010 rail is the standard rail used by TARC launch pads, and is a very common rail for mid and high power rockets under 30 lbs. Rails provide superior guidance to heavy rockets relative to launch rods, and have become the defacto...RW-LG-RAIL-1010X72$39.99