Launch Gear
Rocketry Works features a lineup of quality launch pads for every type of launch, from a family day in the park to a group launch of hundreds of flights per day. Our launchers comply with the NAR Model Rocketry Safety Code standards for safety features, and Rocketry Works launchers are field tested to ensure they are durable and reliable. Be sure to watch our videos about launch site scoping, setup, and safety!
- Launch Pads
- Launch Controllers
- Group Launch Gear
- Igniters
- Recovery Device Protection
- Launch Rails
- Launch Rods
- Launch Accessories
-
MSRP: $7.69$7.31 -
Out of Stock
6 foot 1515 Launch Rail
Faztek
$58.99The 1515 launch rail is necessary only for large L2 or L3 models weighing more than 30 lbs pad weight. This 6 foot section is suitable for extending other 1515 rail sections with Rocketry Works' 1515 Rail Joint (available separately), but is likely...RW-LG-RAIL-1515X72IN$58.99 -
3 Way Combination Launch Rod Mount for 1010 Rail Pad
Rocketry Works
$9.99Designed to support multiple common launch rod sizes in Rocketry Works' Wallops Island 1010 rail launch pad, this 3D printed adapter supports 1/8 inch, 3/16 inch, and 1/4 inch launch rods so you can launch rockets that lack rail guides from your Wallops...RW-COMBO-ROD-MNT-1010$9.99 -
Launch Rod Safety Cap
Rocketry Works
$0.99Rocketry Works designed our 3D printed launch rod safety caps to be durable and they're made of easy to see colors that are easy to spot when dropped on the ground. Use them to cover the top of your launch rods when you are not launching to protect...RW-LRC$0.99 -
Replacement 1/4-20 Button Head Socket Cap Bolt
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rails. Contains one 1/4-20 x 3/4" button head socket cap screw. Requires 5/32 hex (Allen) wrench.RW-LG-1010-BOLT$0.99 -
Distribution Box for Houston Launch Controller
Rocketry Works
$29.99Rocketry Works' Houston launch controller connects to the launch pad using a 50 foot, 9 pin cable that terminates in the red distribution box at the pad. The distribution box connects to the 6 pads through RCA plugs, and it also features a...RW-LG-GODDARD-DIST-BOX$29.99 -
Battery Cable for Houston Launch Controller
Rocketry Works
$14.99The 12 Volt battery connector for the Rocketry Works' Houston launch controller is a high quality, 5 foot long 18 gauge cable with alligator clips on one end, and the 15 Amp Red/Black Powerpole Connector to fit the Houston launch controller's power...RW-LG-BATTERY-CABLE$14.99 -
Replacement Igniter Leads for Houston Launch Controller
Rocketry Works
$8.99These replacement igniter leads for the Houston launch controller connect to the Houston launch controller's distribution box using RCA connectors and feature stainless steel igniter clips are easy to clean and are marked with red strain relief. They are...RW-LG-HOUSTON-LEAD$8.99 -
Extended Igniter Leads for Houston Launch Controller
Rocketry Works
$19.49This extended length igniter lead allows you to place an away pad 15, 25, or 35 ft away from the main pad. Designed to work with the Houston launch controller's RCA port igniter connectors, the lead is made of sturdy 18 gauge lamp wire, with hand...RW-LG-HOUSTON-LONG-LEAD$19.49 -
Replacement Bulb Cap for Estes Electron Beam Launch Controller
Rocketry Works
$0.99Do you worry about the bulb on your Estes Electron Beam launch controller breaking in your field box, because you lost the original plastic bulb cover? Rocketry Works has created a replacement bulb cap so you protect your launch controller bulb. It...RW-LG-BULB-CAP$0.99 -
Replacement 1/4-20 Flanged Button Head Socket Cap Bolt
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rails. Contains one 1/4-20 x 3/4" flanged button head socket cap screw. Requires 5/32 hex (Allen) wrench.RW-LG-1010-FLANGED-BOLT$0.99 -
Replacement Economy T-nut for 1010 Rail
Rocketry Works
$0.79Replacement T-nut for Rocketry Works' 1010 rails. Includes one economy T-nut to anchor 1/4-20 bolts in the groove of a 1010 rail.RW-LG-1010-ECON-T-NUT$0.79