Aerotech

Adjust the delay on Aerotech RMS 18, 29, or 38mm motors with the 18-38mm Delay Drilling Tool. This tool allows you to remove 2, 4, 6, or 8 seconds from the default motor delay by removing delay grain...

Aerotech's 18/20 motor casing includes the forward and aft closures, and does not require a forward seal disk. This case fits 18mm motor mounts, and is intended for use with the following Aerotech...

This lubricant serves to lubricate RMS motor casings and protect o-ring seals in RMS motor casings.  Follow the directions for your RMS motors to help ensure safe operation of your reloadable...

Aerotech's 29/120 motor casing includes the forward and aft closures, and does not require a forward seal disk.  Note that you must be an adult (18 years or older) to purchase or handle RMS...

Aerotech's 29/240motor casing includes the forward and aft closures, and the forward seal disc.  Note that you must be an adult (18 years or older) to purchase or handle RMS reload kits.

Aerotech's 29/100 motor case does not include forward or aft closures; they are available separately or as a combination set.

Aerotech's 29/120 motor case does not include forward or aft closures; they are available separately or as a combination set.

Aerotech's 29/360 motor case does not include forward or aft closures; they are available separately or as a combination set. It does include the required forward seal disc.

Aerotech's 29/60 motor case does not include forward or aft closures; they are available separately or as a combination set.

Aerotech's standard 29mm aft closure

Aerotech's plugged threaded forward closure will not support motor ejection charges, but includes an anchor point for a shock cord anchor bolt.

Aerotech's standard forward closure for 29mm motors. Does not fit the 29/40-120 hobby line motor casing.