Skill Level 2

The Toobish XL model rocket uses short tube sections for fins to guide the rocket through the air!  It's a great first model for older elementary school or middle school age kids, as it assembles without tools and with just wood glue or school glue...

The Loadstar II is a great looking 2 stage rocket with a large, clear payload bay, which makes this a great kit for sending science payloads up to 1000 ft. 18mm A, B, and C motors can power this rocket, but keep in mind that the 1000 ft altitudes on C...

A 2 stage saucer rocket is an attention-grabber at any launch site. It's moderately challenging to assemble the two saucers and fly them in a 2 stage configuration, but it is not overly difficult.

The Loadstar Bulk Pack comes with 12 identical rocket kits, and is intended for classroom or group builds. The Loadstar kit brings skill level 2 difficulty with payload and 2 stage action for groups with previous build experience with plenty of space to...

The Black Brant III is part of a long line of sounding rockets designed to probe the upper atmosphere with scientific instruments.  This 1/10 scale model is based on Canada Bristol Aerospace's sounding rocket that could lift an 18 kg payload to an...

A recent update to this classic model makes its more than 6 foot long airframe transport easily in 2 roughly 3 foot long sections.  That's right...at nearly 7 feet in length, this D and E powered tower is an amazing sight at any launch. A new paint...

The Big Daddy is a colossal 3 inch diameter 19 inch tall model that flies on high thrust C, D, and E motors up to 1375 ft.  As a short, stubby rocket, careful attention to stability is important, so don't add excess weight to the tail, and don't be...

The Nike-X program was a series of ballistic missile interceptors designed to protect cities from incoming nuclear missiles during the cold war.  This model is most similar to the Zeus line of interceptors within the Nike-X program, though it is not...

The Super Neon is a classic Estes tube fin rocket, with balsa fins as well as tube fins providing guidance.  A plastic nose cone and 12 inch parachute recovery round out this kit.  This makes for a lot of gluing in the aft section, which is why...

 Estes brought the Goblin's classic lines back to the production lines!  4 laser cut balsa fins on a BT-55 body tube with a sleek plastic nose cone and a 24mm motor mount can send this vintage kit up to 1,400 ft! Waterslide decals bring the old...

This is a 1/10 sport scale model of the NASA sounding rocket that conducted upper atmosphere research in the 1960s. Its cardboard, balsa and plastic construction makes for a simple build, but the fin shaping and paint job required for an accurate scale...

This upscale remake of the Estes classic Astron Sprint brings back the smooth lines and aerodynamic shape of the smaller model in a 24mm motor powered rocket that will catch people's attention on the launch range.  Flights to 1300 feet are within...