Custom Centering Rings (per ring)
- Custom made product within 3 business days
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 2 or above||and pay only $3.49 each|
We'll cut your custom plywood centering rings for you! We use 1/8 inch (3mm) Baltic birch plywood, which is sturdy enough for low power, mid power, and most Level 1 and Level 2 high power flights. Like all oru centering rings, we include pre-scored eye bolt and Kevlar mounting holes, and a pre-scored space to slide your centering rings past a rail button. If you don't need the holes in the rings, just smear some wood glue or epoxy into the score marks, and it's airtight. Just let us know your specifications:
- Inside diameter
Give us the outside diameter of your motor tube, in millimeters
Note that this measurement is almost never as simple as "29mm" or "38mm." That's the inside diameter of a motor tube. A thin wall 29mm motor tube outside diameter is typically about 29.7mm, whereas a thick wall motor tube is typically 31.2mm outside diameter. You should get out a set of calipers and measure the outside diameter of the motor tube, ideally with a motor installed so you don't deform the tube.
- Outside diameter
Give us the inside diameter of your airframe tube, in millimeters
Calipers are the best way to measure the inside diameter.
- Any custom text you want engraved on the rings
A phone number or NAR/TRA number is handy to have permanently on your rocket.
Price is for 1 centering ring, so be sure to specify how many rings you need. We'll come as close to your specified size as possible, but you may need to sand the inside or outside diameter slightly to fit your tubes.