TARC Supplies
The American Rocketry Challenge (TARC) is an annual rocketry contest for youth in grades 6 through 12. Teams compete each year for hundreds of thousands of dollars in scholarships, and a chance to travel to the Paris Air Show to compete for the United States! The challenge is different each year, but Rocketry Works has the supplies you'll need to succeed!
- Adhesives
- Bulkheads
- Centering Rings
- Fins and Fin Material
- Nose Cones
- Recovery Gear
- Tools
- Transitions
- Tubes
-
Plywood Bulkhead for 3 Inch Plastic Nose Cone
Rocketry Works
$4.99Great for addressing the difficulties fitting a parachute into short, squat 3 inch diameter rockets like the Big Daddy, this 1/8 inch thick bulkhead fits inside a 3 inch diameter blow molded nose cone, and you can use it to anchor a 1/4-20 eye hook for...RW-BULKHEAD 73MM PW 3MM$4.99 -
29mm Heavy Wall LOC - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed...RW-CR-29MM HW LOC/ BT-60 PW 1/8 IN$1.99 -
29mm Heavy Wall LOC - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock...RW-CR-29MM-HW-LOC-BT-70-PW-3MM$1.99 -
29mm Heavy Wall LOC - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 66mm (BT-80) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for...RW-CR-29MM-HW-LOC-BT-80-PW-3MM$1.99 -
3D Printed PNC-60K Nose Cone
Rocketry Works
$3.99This nose cone is an 5.25 inch (13.3 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone--shoulder and nose cone that glues together with epoxy. at 1.6mm thick walls, it's a sturdy nose cone. Typically, fliers...RW-PNC-60K$3.99 -
29mm Heavy Wall - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed. Sold as a set...RW-CR-29MM HW / BT-60 PW 1/8 IN$1.99 -
Braided Kevlar Shock Cord by the foot
Rocketry Works
$0.11Braided Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Low power rockets can use 100 lb. tensile strength, while mid power rockets will do better with 250 to 750 lb tensile...RW-SC-BRAIDED-KEVLAR$0.11 -
Sandpaper 8.5 x 11 sheet
Rocketry Works
$0.99Sandpaper in different grits is essential for preparing surfaces for adhesive, and for removing imperfections from finished surfaces. Available in a variety of grits: 80 grit for roughing wood, cardboard, plastic, or fiberglass surfaces for...RW-SANDPAPER$0.99 -
56mm (BT-70) Bulkhead
Rocketry Works
$1.99These laser cut bulkheads are made from 1/8 inch birch plywood, and sized to fit securely at one end of a 56mm (BT-70) coupler, and inside a BT-70 body tube. Sold as a set of 2 bulkhead plates, one smaller than the other. Each plate comes with 2...RW-BULKHEAD BT-70 PW 3MM$1.99 -
Custom Length Tube
Rocketry Works
$3.99Rocketry Works can cut tubes for you to any length less than 34 inches, and we can optionally cut 3 or 4 1/8 inch slots in the airframe to your specifications.RW-TUBE-CUSTOM-CUT$3.99 -
Custom Mylar Streamer
Rocketry Works
$1.99You can choose your own dimensions for Rocketry Works' highly reflective 2 mil thick Mylar streamers! Just give us some key information the streamer you need, and we'll cut your streamer to length. To determine pricing, you're going to need...RW-ST-MYLAR-CUSTOM$1.99 -
29mm - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 29mm motor tube in a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock cord or for an eye hook, and...RW-CR-29MM BT-70 PW 3MM$1.99