Rocketry Works
Plywood Bulkhead for 3 Inch Plastic Nose Cone
- SKU:
- RW-BULKHEAD 73MM PW 3MM
- UPC:
- MPN:
- Availability:
- In stock items ship within 1 business day; more within 3 business days
MSRP:
Now:
$4.99
Was:
— You save
Description
Great for addressing the difficulties fitting a parachute into short, squat 3 inch diameter rockets like the Big Daddy, this 1/8 inch thick bulkhead fits inside a 3 inch diameter blow molded nose cone, and you can use it to anchor a 1/4-20 eye hook for mounting the shock cord. Be sure to thoroughly rough sand the smooth plastic inside of the nose cone to ensure your epoxy bonds well to the nose cone surface. Requires irreversible modification to the nose cone shoulder.
Related Products
3D Printed PNC-2065 Nose Cone for 2 Inch Tubes
Rocketry Works
MSRP:
Now:
$7.99
Was:
This nose cone is a 6.5 inch (16.1 cm) long 3D printed ABS plastic ogive nose cone for 2 inch body tubes. The shoulder includes a shock cord attachment strut. The 3D printed texture can be...
RW-3DP-PNC-2065
Custom 3D Printed Nose Cone
Rocketry Works
MSRP:
Now:
$8.99
Was:
Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009
RW-PNC-CUSTOM
3D Printed PNC-75mm-KS Nose Cone
Rocketry Works
MSRP:
Now:
$14.99
Was:
This custom 3D printed ABS plastic ogive nose cone is up to 8 inches (20.3 cm) long for 3 inch body tubes. Note that there are a variety of "3 inch" body tubes available, each with slightly...
RW-3DP-PNC-75MM-KS
3D Printed PNC-80K Nose Cone
Rocketry Works
MSRP:
Now:
$9.99
Was:
This nose cone is an 8.25 inch (21.2 cm) long 3D printed ABS plastic ogive nose cone for BT-80 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The nose cone...
RW-3DP-PNC-80K
3D Printed PNC-70K Nose Cone
Rocketry Works
MSRP:
Now:
$7.99
Was:
This nose cone is an 5.5 inch (14 cm) long 3D printed ABS plastic ogive nose cone for BT-70 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The shoulder...
RW-3DP-PNC-70K
Customers Also Viewed


Motor Retainer Assembly
Aeropack
MSRP:
Now:
$15.00
Was:
Aeropack set the standard for aluminum motor retainers, so you can quickly and easily switch motors after flight without any tools. Just unscrew the threaded cap and load a new motor. The durable...
API-RA
3D Printed Bidirectional Transition for BT-70 and BT-80 with Avionics Bay
Rocketry Works
MSRP:
Now:
$18.99
Was:
New for 2023! We've upgraded our 3D printed transition design to work equally well in either direction--large end forward or small end forward. This makes it a great component for TARC 2024...
RW-TRANS-BI-BT-70-BT-80-AV-BAY


Plywood Big Daddy Upgrade Set
Rocketry Works
MSRP:
Now:
$12.99
Was:
Upgrade your Big Daddy fins and centering rings to plywood, through-the-wall fins! Strong plywood construction and TTW design ensures that you spend more of your flight time flying, and less time...
RW-BIG-DADDY-SET-TTW-3MM

Tube Slotting and Cutting Guide
Rocketry Works
MSRP:
Now:
$15.99
Was:
Cut your own slots for 1/8 inch thick through-the-wall fins in cardboard airframe tubes with this sturdy plastic tube slotting guide! It's also useful as a tube cutting guide, helping you cut...
RW-TUBE-SLOT-GUIDE
Nylon Parachute - 1.7 oz
Top Flight Recovery
MSRP:
Now:
$5.00
Was:
These parachutes from Top Flight Recovery are slightly heavier weight than Aerotech's famously thin and slippery parachutes. They are plenty strong for use in low and mid power rockets, and...
TF-NYLON-CHUTE-1.7-OZ


3 Way Combination Launch Rod Mount for 1010 Rail Pad
Rocketry Works
MSRP:
Now:
$9.99
Was:
Designed to support multiple common launch rod sizes in Rocketry Works' Wallops Island 1010 rail launch pad, this 3D printed adapter supports 1/8 inch, 3/16 inch, and 1/4 inch launch rods so you can...
RW-COMBO-ROD-MNT-1010
Mega Der Red Max Plywood Fin Upgrade Set of 3
Rocketry Works
MSRP:
Now:
$29.59
Was:
These 1/8 inch thick plywood replacement fins for the Estes Der Mega Red Max kit are a great option to improve your build strength and durability over the stock composite fins that can be damaged in...
RW-FIN-MEGA-RED-MAX-PLY-3MM


Wallops Island Launch Pad
Rocketry Works
MSRP:
Now:
$283.48
Was:
Rocketry Works' Wallops Island pad is a sturdy pad designed for use with 1010 launch rail, and is ideal for TARC use or for Level 1 and Level 2 flights up to 10 lb rockets. We set out to design an...
RW-LG-WALLOPS-ISLAND

Motor Retainer Cap
Aeropack
MSRP:
Now:
$8.00
Was:
For those times when you lose a motor retainer cap, here is your inexpensive way to replace just the cap without buying a whole new retainer. Sizing here is simple...just match the motor mount...
API-RC