Nose Cones

Nose Cones

Balsa and plastic nose cones of various shapes and sizes provide the leading edge of a model rocket.

  • #9 lead shot for adding nose weight for improved stability

    #9 Lead Shot Nose Weight

    Rocketry Works

    $1.24
    Number 9 lead shot helps maintain stability when upgrading motor size on short, stubby rockets. Use simulation software to calculate the amount of nose weight you'll need for your particular rocket, and choose the amount of shot you need, in grams from...
    RW-LEAD-WEIGHT-#9
    $1.24
  • 3D printed PNC-60KS Altimeter Bay Nose Cone 3D printed PNC-60KS Altimeter Bay Nose Cone includes extra quick release plastic rivets

    3D Printed PNC-60KS Altimeter Bay Nose Cone

    Rocketry Works

    $5.99
    This nose cone is an 4.15 inch (10.5 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone with vents for accurate barometric altimeter measurements--the shoulder and nose cone separate with quick release plastic...
    RW-PNC-60KS-ALT
    $5.99
  • PNC-2065 PNC-2065

    3D Printed PNC-2065 Nose Cone for 2 Inch Tubes

    Rocketry Works

    $7.99
    This nose cone is a 6.5 inch (16.1 cm) long 3D printed ABS plastic ogive nose cone for 2 inch body tubes.  The shoulder includes a shock cord attachment strut. The 3D printed texture can be smoothed out with some wood filler and sanding. This nose...
    RW-3DP-PNC-2065
    $7.99
  • 3D Printed PNC-70K Nose Cone 3D Printed PNC-70K Nose Cone

    3D Printed PNC-70K Nose Cone

    Rocketry Works

    $7.99
    This nose cone is an 5.5 inch (14 cm) long 3D printed ABS plastic ogive nose cone for BT-70 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The shoulder includes a shock cord attachment strut. The 3D printed...
    RW-3DP-PNC-70K
    $7.99
  • PNC-75MM-KS assembled PNC-75MM-KS apart

    3D Printed PNC-75mm-KS Nose Cone

    Rocketry Works

    $14.99
    This custom 3D printed ABS plastic ogive nose cone is up to 8 inches (20.3 cm) long for 3 inch body tubes. Note that there are a variety of "3 inch" body tubes available, each with slightly different outside and inside diameters. To better fit your...
    RW-3DP-PNC-75MM-KS
    $14.99
  • PNC-60K assembled PNC-60K assembled on its side

    3D Printed PNC-60K Nose Cone

    Rocketry Works

    $3.99
    This nose cone is an 5.25 inch (13.3 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone--shoulder and nose cone that glues together with epoxy. at 1.6mm thick walls, it's a sturdy nose cone. Typically, fliers...
    RW-PNC-60K
    $3.99
  • 3D Printed PNC-80K Nose Cone 3D Printed PNC-80K Nose Cone Base View

    3D Printed PNC-80K Nose Cone

    Rocketry Works

    $9.99
    This nose cone is an 8.25 inch (21.2 cm) long 3D printed ABS plastic ogive nose cone for BT-80 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The nose cone is sturdy at 1.6mm thick, and comes in 2 parts--the...
    RW-3DP-PNC-80K
    $9.99
  • Custom nose cone Custom 3D Printed Nose Cone

    Custom 3D Printed Nose Cone

    Rocketry Works

    $8.99
    Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009
    RW-PNC-CUSTOM
    $8.99
  • 3D printed 24mm payload nose cone 3D Printed 24mm Payload Nose Cone

    3D Printed 24mm Payload Nose Cone

    Rocketry Works

    $9.99
    Designed to allow flights of Jolly Logic altimeters in 24mm diameter airframes like the Rocketry Works Socrates or Toobish kits, this 3D printed ABS nose cone fits in an 24mm (BT-50) body tube and attaches to the shock cord just like a typical nose cone...
    RW-NC-24-ALTIMETER-PAYLOAD
    $9.99
  • Rocketry Works altimeter payload nose cone for 18mm body tubes Rocketry Works altimeter payload nose cone for 18mm body tubes ready for flight

    3D Printed 18mm to 24mm Payload Nose Cone

    Rocketry Works

    $6.99
    Designed to allow flights of Jolly Logic altimeters in 18mm diameter airframes like the Viking, this 3D printed ABS nose cone fits in an 18mm body tube and attaches to the shock cord just like a typical nose cone.  But this nose cone flares out to...
    RW-NC-18-24-ALTIMETER-PAYLOAD
    $6.99
  • Rocketry Works flexible foam BT-70 nose cone Rocketry Works flexible foam BT-70 nose cone aft view

    Flexible Foam BT-70 Nose Cone

    Rocketry Works

    $8.99
    Ideal for egg lofting and TARC models, this flexible foam BT-70 nose cone features a smooth finish, and it helps absorb the impact of landing a fragile payload. The foam material in this nose cone is is highly compressible, providing superior cushioning...
    RW-NC-BT-70-FLEX-FOAM
    $8.99