Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
Plywood Bulkhead for 3 Inch Plastic Nose Cone
Rocketry Works
$4.99Great for addressing the difficulties fitting a parachute into short, squat 3 inch diameter rockets like the Big Daddy, this 1/8 inch thick bulkhead fits inside a 3 inch diameter blow molded nose cone, and you can use it to anchor a 1/4-20 eye hook for...RW-BULKHEAD 73MM PW 3MM$4.99 -
#9 Lead Shot Nose Weight
Rocketry Works
$1.24Number 9 lead shot helps maintain stability when upgrading motor size on short, stubby rockets. Use simulation software to calculate the amount of nose weight you'll need for your particular rocket, and choose the amount of shot you need, in grams from...RW-LEAD-WEIGHT-#9$1.24 -
29mm Heavy Wall LOC - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed...RW-CR-29MM HW LOC/ BT-60 PW 1/8 IN$1.99 -
29mm Heavy Wall LOC - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock...RW-CR-29MM-HW-LOC-BT-70-PW-3MM$1.99 -
29mm Heavy Wall LOC - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 66mm (BT-80) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for...RW-CR-29MM-HW-LOC-BT-80-PW-3MM$1.99 -
3D Printed Stand-off 1010 Launch Rail Guides: BT-70 to BT-80 (1 pair)
Rocketry Works
$0.99These 3D printed rail guides are designed to support a BT-70 airframe fitted with a BT-80 payload bay. These guides feature Rocketry Works' unique mounting system that works with either wood glue or epoxy. These will stick well to a rough paper...RW-RAIL-GUIDE-SO-BT-70-BT-80$0.99 -
3D Printed PNC-60K Nose Cone
Rocketry Works
$3.99This nose cone is an 5.25 inch (13.3 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone--shoulder and nose cone that glues together with epoxy. at 1.6mm thick walls, it's a sturdy nose cone. Typically, fliers...RW-PNC-60K$3.99 -
29mm Heavy Wall - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed. Sold as a set...RW-CR-29MM HW / BT-60 PW 1/8 IN$1.99 -
Custom Plywood Fins 1/8 Inch Thick
Rocketry Works
$4.99Rocketry Works can cut your design into 1/8 inch thick plywood fins for you! Simply upload your fin pattern, and we can cut your fins to your specifications! Vector artwork files are best delivered in Lighburn .lbrn or Adobe...RW-CUSTOM-FIN-PLY-1-8$4.99 -
3D Printed 3/16 inch Launch Lugs (1 pair)
Rocketry Works
$0.59These 3D printed 3/16 inch launch lugs feature Rocketry Works' unique mounting system that works with either wood glue or epoxy! These will stick well to a rough paper paper tube, so you may need to sand away any glossy finish on the tube at the...RW-LL-3-16$0.59 -
Replacement 3 Piece Nylon 1010 Rail Button Parts
Rocketry Works
$0.49These 3 piece replacement nylon replacement parts are handy in case you lose the plastic components to your 1010 rail buttons, or if you have a unique attachment requirement that does not require the standard 8-32 x 1/2 inch bolt and T-nut of Rocketry...RW-RB-1010-NYLON$0.49 -
Braided Kevlar Shock Cord by the foot
Rocketry Works
$0.11Braided Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Low power rockets can use 100 lb. tensile strength, while mid power rockets will do better with 250 to 750 lb tensile...RW-SC-BRAIDED-KEVLAR$0.11