Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
3D Printed 1/4 inch Launch Lugs (1 pair)
Rocketry Works
$0.59These 3D printed 1/4 inch launch lugs feature Rocketry Works' unique mounting system that works with either wood glue or epoxy! These will stick well to a rough paper paper tube, so you may need to sand away any glossy finish on the tube at the...RW-LL-1-4$0.59 -
3D Printed Mid Power 1010 Launch Rail Guides (1 pair)
Rocketry Works
$0.99These 3D printed mid power rail guides feature Rocketry Works' unique mounting system that works with either wood glue or epoxy! These will stick well to a rough paper paper tube, so you may need to sand away any glossy finish on the tube at the...RW-RAIL-GUIDE$0.99 -
Sandpaper 8.5 x 11 sheet
Rocketry Works
$0.99Sandpaper in different grits is essential for preparing surfaces for adhesive, and for removing imperfections from finished surfaces. Available in a variety of grits: 80 grit for roughing wood, cardboard, plastic, or fiberglass surfaces for...RW-SANDPAPER$0.99 -
56mm (BT-70) Bulkhead
Rocketry Works
$1.99These laser cut bulkheads are made from 1/8 inch birch plywood, and sized to fit securely at one end of a 56mm (BT-70) coupler, and inside a BT-70 body tube. Sold as a set of 2 bulkhead plates, one smaller than the other. Each plate comes with 2...RW-BULKHEAD BT-70 PW 3MM$1.99 -
Replacement T-nut for 1010 Rail Buttons
Rocketry Works
$0.49Replacement T-nut for Rocketry Works' 1010 rail button. Includes one standard T-nut to fit Rocketry Works' 1010 rail buttons. Features a knurled threaded section for better grip when tightening against the inside of the airframe.RW-RB-1010-T-NUT$0.49 -
Replacement Hex Nut for 1010 Rail Buttons
Rocketry Works
$0.49Replacement hex nut for Rocketry Works' 1010 rail button. Includes one steel 8-32 hex nut to fit Rocketry Works' 1010 rail buttons.RW-RB-1010-HEX-NUT$0.49 -
Replacement Bolt for 1010 Rail Buttons
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rail button. It is a stainless steel, 6-32 button head phillips bolt.RW-RB-1010-BOLT$0.99 -
Custom Length Tube
Rocketry Works
$3.99Rocketry Works can cut tubes for you to any length less than 34 inches, and we can optionally cut 3 or 4 1/8 inch slots in the airframe to your specifications.RW-TUBE-CUSTOM-CUT$3.99 -
Custom Mylar Streamer
Rocketry Works
$1.99You can choose your own dimensions for Rocketry Works' highly reflective 2 mil thick Mylar streamers! Just give us some key information the streamer you need, and we'll cut your streamer to length. To determine pricing, you're going to need...RW-ST-MYLAR-CUSTOM$1.99 -
29mm - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 29mm motor tube in a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock cord or for an eye hook, and...RW-CR-29MM BT-70 PW 3MM$1.99 -
24mm - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 24mm motor tube in a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock cord or for an eye hook, and...RW-CR-24MM BT-70 PW 3MM$1.99 -
24mm - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 24mm motor tube in a 66mm (BT-80) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock cord or for an eye hook, and...RW-CR-24MM BT-80 PW 3MM$1.99