Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
3D Printed PNC-70AJ Nose Cone
Rocketry Works
$6.99Type a description for this product here...RW-3DP-PNC-70AJ$6.99 -
3D Printed PNC-70K Nose Cone
Rocketry Works
$7.99This nose cone is an 5.5 inch (14 cm) long 3D printed ABS plastic ogive nose cone for BT-70 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The shoulder includes a shock cord attachment strut. The 3D printed...RW-3DP-PNC-70K$7.99 -
3D Printed PNC-75mm-KS Nose Cone
Rocketry Works
$14.99This custom 3D printed ABS plastic ogive nose cone is up to 8 inches (20.3 cm) long for 3 inch body tubes. Note that there are a variety of "3 inch" body tubes available, each with slightly different outside and inside diameters. To better fit your...RW-3DP-PNC-75MM-KS$14.99 -
3D Printed PNC-60K Nose Cone
Rocketry Works
$3.99This nose cone is an 5.25 inch (13.3 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone--shoulder and nose cone that glues together with epoxy. at 1.6mm thick walls, it's a sturdy nose cone. Typically, fliers...RW-PNC-60K$3.99 -
1/4 inch thick Custom Centering Rings (per ring)
Rocketry Works
$7.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is no larger...RW-CR-CUSTOM-1-4$7.99 -
1/8 inch thick Custom Centering Rings (per ring)
Rocketry Works
$5.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is less than 3...RW-CR-CUSTOM-1-8$5.99 -
29mm Heavy Wall - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed. Sold as a set...RW-CR-29MM HW / BT-60 PW 1/8 IN$1.99 -
3D Printed PNC-80K Nose Cone
Rocketry Works
$9.99This nose cone is an 8.25 inch (21.2 cm) long 3D printed ABS plastic ogive nose cone for BT-80 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The nose cone is sturdy at 1.6mm thick, and comes in 2 parts--the...RW-3DP-PNC-80K$9.99 -
Custom Plywood Fins 1/8 Inch Thick
Rocketry Works
$4.99Rocketry Works can cut your design into 1/8 inch thick plywood fins for you! Simply upload your fin pattern, and we can cut your fins to your specifications! Vector artwork files are best delivered in Lighburn .lbrn or Adobe...RW-CUSTOM-FIN-PLY-1-8$4.99 -
Custom Plywood Fins 1/4 Inch Thick
Rocketry Works
$7.88Rocketry Works can cut your design into 1/4 inch thick plywood fins for you! Simply upload your fin pattern, and we can cut your fins to your specifications! Vector artwork files are best delivered in Lighburn .lbrn or Adobe...RW-CUSTOM-FIN-PLY-1-4$7.88 -
Custom Plywood Fins 3/8 Inch Thick
Rocketry Works
$12.80Rocketry Works can cut your design into 3/8 inch thick plywood fins for you! Simply upload your fin pattern, and we can cut your fins to your specifications! Vector artwork files are best delivered in Lighburn .lbrn or Adobe...RW-CUSTOM-FIN-PLY-3-8$12.80 -
Custom 3D Printed Nose Cone
Rocketry Works
$8.99Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009RW-PNC-CUSTOM$8.99