Electronics

Electronics

  • Example Pnut altimeter in the 24mm altimeter sled, inserted into a 24mm tube for scale Example Pnut altimeter in the 24mm altimeter sled, with a 24mm tube for scale

    3D Printed Pnut Altimeter Sled for 24mm Tube

    Rocketry Works

    $4.99
    This 3D printed altimeter sled is a secure way to mount a Perfect Flite Pnut altimeter in a 24mm tube.  The 23mm round edges slide in and out of a 24mm tube easily, and the recessed alcove for the Pnut altimeter cradles the altimeter out of harm's...
    RW-ALT-MNT-PNUT-24MM
    $4.99
  • Rocketry Works hanging altimeter sled showing a PerfectFlite PNUT altimeter mounted on nylon standoff pegs. Altimeter not included. Rocketry Works hanging altimeter sled package contents--shown with 1.6 inch width and the PerfectFlite APRA. Altimeter not included.

    Plywood Electronics Hanging Sled

    Rocketry Works

    $3.99
    The first step in keeping an electronic altimeter safe and working well is to fly it in a payload bay, away from volatile ejection gasses.  But also vital is preventing the altimeter from rattling around inside a payload tube. This 1/8 inch plywood...
    RW-ALT-MNT
    $3.99
  • AltimeterOne replacement case AltimeterTwo replacement case

    Replacement Jolly Logic Altimeter Case

    Jolly Logic

    $4.95
    Jolly Logic Altimeters are designed to be modular and user-servicable. So if your case is damaged, you can easily replace the case of any altimeter made after 2013.  You can review Jolly Logic's Visual Repair Guide to see what's involved.
    JL-C1
    $4.95