Custom Plywood Fins
- Usually ships within 72 hours
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 2 or above||and pay only $3.49 each|
Rocketry Works can cut your plywood fins for you! Simply upload your fin pattern and an optional logo file, and we can cut your fins to your specifications! Fin size is limited to plywood material in 8x8 inch or 12x6 inch sections, and work best in 1/8 inch plywood thickness, though thicknesses from 1/16 inch to 1/4 inch are possible. Price is per fin, so please indicate the number of fins you require. Fins can be cut to support through-the-wall configuration, but can be best tested on BT-70 and BT-80 airframe sizes and 24mm and 29mm motor tubes. Customer assumes responsibility for dimensional accuracy for other airframe/motor tube combinations.
Vector artwork files are best delivered in Adobe Illustrator .ai or Inkscape .svg formats, using the following conventions:
- Red (ff0000) for vector cut lines
- Blue (0000ff) for vector engrave lines
- Black (000000) for raster engrave lines
If you don't have vector artwork, you may submit a scanned sketch of the fin design and dimensions you would like developed. A one-time $5.00 custom artwork fee applies.
Be sure to indicate the number of fins you would like, as pricing is quoted per fin.
# Fins per Package: