Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
Bonded Kevlar Shock Cord by the foot
Rocketry Works
$0.29Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Bonded Kevlar cord is treated to resist fraying, and is a bit stiffer and more slippery than other string, which makes it easier...RW-SC-KEVLAR$0.29 -
29mm Heavy Wall - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 66mm (BT-80) airframe tube. The fit on the motor tube is tight, so some light sanding may be needed. Sold...RW-CR-29MM HW / BT-80 PW 1/8 IN$1.99 -
29mm Heavy Wall - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 56mm (BT-70) airframe tube. The fit on the motor tube is tight, so some light sanding may be needed. Sold as a set of 2...RW-CR-29MM HW / BT-70 PW 1/8 IN$1.99 -
Nylon Parachute - 1.7 oz
Top Flight Recovery
$5.00These parachutes from Top Flight Recovery are slightly heavier weight than Aerotech's famously thin and slippery parachutes. They are plenty strong for use in low and mid power rockets, and their bright colors are easy to track in clear or cloudy...TF-NYLON-CHUTE-1.7-OZ$5.00 -
29mm White Body Tube / Motor Mount
Rocketry Works
$3.99Rocketry Works has discontinued its thin wall 29mm motor tube. We recommend using the thicker walled LOC 29mm motor tube. This matte finish 29mm body tube is suitable for 29mm airframes or motor mounts, and it adheres well to white glue, wood glue,...RW-BT-29MM-34IN-WHITE$3.99 -
3-Slotted BT-70 White Body Tube 16 inch length
Rocketry Works
$4.99This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...RW-BT-70-S3-16IN-WHITE$4.99 -
3-Slotted BT-70 White Body Tube 17 inch length
Rocketry Works
$4.99This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...RW-BT-70-S3-17IN-WHITE$4.99 -
24mm White Body Tube / Motor Mount
Rocketry Works
$2.99This matte finish 24mm body tube is suitable for 24mm airframes or motor mounts, and it adheres well to white glue, wood glue, CA glue, or epoxy, and pencil and pen both mark it easily. The 34 inch length ships inexpensively in USPS mailing tubes,...RW-BT-50-34IN-WHITE$2.99