Estes
Viking
- SKU:
- EST-1949
- UPC:
- 47776019492
- MPN:
- 1949
- Availability:
- In stock items ship within 24 hours
Description
This simple kit gives builders a choice of design styles, using anywhere from 3 to 5 fins in one of 48 different fin configurations. The cardboard fins must be glued straight on the BT-20 body tube, which is the main challenge that sets this model apart from E2X models. It also can take a coat of paint, which is more typical of Skill Level 1 models than E2X models. But a word of warning: be sure to keep your motors sized appropriately to the flying field. There's no shame in flying a 1/2A6-2 motor on this rocket if it means your fliers can recover their rocket within a school field. B and C motors in this kit will send it over 1000 ft, out of sight and likely not seen again.
Additional Information
Skill Level: |
1 |
Length (inches): |
12.1 |
Length (cm): |
30.7 |
Diameter (inches): |
0.74 |
Diameter (mm): |
19 |
Weight (ounces): |
0.6 |
Weight (grams): |
17 |
Recommended Motors: |
1/2A6-2, A8-3 (first launch), A8-5, B4-4, B6-4, B6-6, C6-5, C6-7 |
Estimated Altitude (ft): |
1600 |
Estimated Altitude (m): |
488 |
Fin Material: |
Cardboard |
Nose Cone Material: |
Plastic |
Recovery Device: |
Streamer |
Launch rod size: |
1/8 inch |
Special Requirements: |
16 |