TARC Supplies
The American Rocketry Challenge (TARC) is an annual rocketry contest for youth in grades 6 through 12. Teams compete each year for hundreds of thousands of dollars in scholarships, and a chance to travel to the Paris Air Show to compete for the United States! The challenge is different each year, but Rocketry Works has the supplies you'll need to succeed!
- Adhesives
- Bulkheads
- Centering Rings
- Fins and Fin Material
- Nose Cones
- Recovery Gear
- Tools
- Transitions
- Tubes
-
Plywood Trapezoidal Fins TTW fits 29mm in BT-70 (Set of 3)
Rocketry Works
$7.99Save yourself the trouble of cutting your own plywood fins with thee sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on landing better than any other type of fin, since they are tucked up...RW-29MM-BT-70-TTW-3MM-TRAP-FIN$7.99 -
Bonded Kevlar Shock Cord by the foot
Rocketry Works
$0.29Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Bonded Kevlar cord is treated to resist fraying, and is a bit stiffer and more slippery than other string, which makes it easier...RW-SC-KEVLAR$0.29 -
Plywood Trapezoidal Fins TTW fits 29mm in BT-80 (Set of 3)
Rocketry Works
$7.99Save yourself the trouble of cutting your own plywood fins with thee customizable sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on landing better than any other type of fin, since they are...RW-29MM-BT-80-TTW-3MM-TRAP-FIN$7.99 -
29mm Heavy Wall - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 66mm (BT-80) airframe tube. The fit on the motor tube is tight, so some light sanding may be needed. Sold...RW-CR-29MM HW / BT-80 PW 1/8 IN$1.99 -
29mm Heavy Wall - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 56mm (BT-70) airframe tube. The fit on the motor tube is tight, so some light sanding may be needed. Sold as a set of 2...RW-CR-29MM HW / BT-70 PW 1/8 IN$1.99 -
Pocket CA Screw-top Cyanoacrylate Glue
Bob Smith Industries
$5.99Pocket CA is intended for mobile use--in a field box or other places a bottle may leak. These bottles feature a screw-top lid with a pin that plugs the bottle to help prevent clogging the nozzle or leaking. The screw top cap and pin make the nozzle tip...BSI-PCA$5.99 -
Nylon Parachute - 1.7 oz
Top Flight Recovery
$5.00These parachutes from Top Flight Recovery are slightly heavier weight than Aerotech's famously thin and slippery parachutes. They are plenty strong for use in low and mid power rockets, and their bright colors are easy to track in clear or cloudy...TF-NYLON-CHUTE-1.7-OZ$5.00 -
29mm White Body Tube / Motor Mount
Rocketry Works
$3.99Rocketry Works has discontinued its thin wall 29mm motor tube. We recommend using the thicker walled LOC 29mm motor tube. This matte finish 29mm body tube is suitable for 29mm airframes or motor mounts, and it adheres well to white glue, wood glue,...RW-BT-29MM-34IN-WHITE$3.99 -
Un-Cure Cyanoacrylate Glue Debonder
Bob Smith Industries
$4.99When you need to remove hardened Cyanoacrylate glue, BSI's Uncure debonder is the go to product. In its easy to dispense bottles, you can deliver the right amount to break down these super-strong bonds--whether you're working on paper, wood, or...BSI-UCCADB$4.99 -
3-Slotted BT-70 White Body Tube 16 inch length
Rocketry Works
$4.99This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...RW-BT-70-S3-16IN-WHITE$4.99 -
3-Slotted BT-70 White Body Tube 17 inch length
Rocketry Works
$4.99This matte finish BT-70 body tube (2.18 inches outside diameter) has three 1/8 inch wide slots, 4.5 inches long, 1 inch from one end of the tube, and is designed to fit 1/8 inch plywood through the wall fins in large low power or mid power...RW-BT-70-S3-17IN-WHITE$4.99 -
Mid-Cure 15 Minute Epoxy
Bob Smith Industries
$13.99This is the Goldilocks Momma Bear of BSI's 5-15-30 minute epoxy lineup, giving a moderate working time of approximately 10-15 minutes before it cures, which gives enough time to apply to a moderate surface area or to adjust parts for proper alignment...BSI-MCE$13.99