Description
This ABS plastic tail cone includes an aft centering ring for a 29mm thin wall motor mount and 4 1/8 inch slots to allow through-the wall fins. Some sanding of the centering ring and the fin slots may be required. The 3D printed surface sticks CA glue, wood glue, and epoxy well, and imperfections in the surface finish can be smoothed out with a couple layers of wood filler. Fits most 29mm motor retainers.
Related Products
29mm - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99
These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount a 29mm motor tube in a 66mm (BT-80) airframe tube. These centering rings are designed to fit 29mm thin wall...
RW-CR-29MM BT-80 PW 3MM
29mm Heavy Wall LOC - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99
These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 66mm (BT-80) airframe tube. Rocketry Works' unique...
RW-CR-29MM-HW-LOC-BT-80-PW-3MM
29mm Heavy Wall - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99
These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 66mm (BT-80) airframe tube. The fit on the motor...
RW-CR-29MM HW / BT-80 PW 1/8 IN
Plywood Trapezoidal Fins TTW fits 29mm in BT-80 (Set of 3)
Rocketry Works
$7.99
Save yourself the trouble of cutting your own plywood fins with thee customizable sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on...
RW-29MM-BT-80-TTW-3MM-TRAP-FIN