Rocketry Works

The 5/32 inch allen wrench is the right size to use with Rocketry Works' 1010 rail bolts.

These laser cut bulkheads are made from 1/8 inch birch plywood, and sized to fit securely at one end of a 56mm (BT-70) coupler, and inside a BT-70 body tube. Sold as a set of 2 bulkhead plates, one...

These laser cut bulkheads are made from 1/8 inch birch plywood, and sized to fit securely at one end of a 66mm (BT-80) coupler, and inside a BT-80 body tube. Sold as a set of 2 bulkhead plates, one...

Sometimes, orders require additional shipping to complete, and Rocketry Works will let you know what's needed to get your order to you door. Just pick the price we quoted you from the select list and...

The 12 Volt battery connector for the Rocketry Works' Houston launch controller is a high quality, 5 foot long 18 gauge cable with alligator clips on one end, and the 15 Amp Red/Black Powerpole...

Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Bonded Kevlar cord is treated to resist fraying, and is a bit stiffer and...

Braided Kevlar shock cord is incredibly strong for its weight and is heat resistant, so it makes a great shock cord in model rockets. Low power rockets can use 100 lb. tensile strength, while mid...

These upscale Bull Pup fins fit a 17.5 inch long BT-80 airframe tube to produce a nice scale model of the Bull Pup air to surface missile from the late 1960s. Through the Wall fins require a slotted...

Rocketry Works Clip Whips are built sturdy for many years of success launching clusters or conducting multiple simultaneous launches.  Ranging in number from 2 to 6 igniter leads, they are made...

Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009

Custom 3D printing work can involve complicated price and shipping calculations, so this product is reserved for work quoted by Rocketry Works staff. We will give you a price that includes shipping...

We'll cut your custom plywood centering rings for you!  Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the...