Rocketry Works
Mid Power Executioner Clone
- SKU:
- RW-EXECUTIONER
- Availability:
- In stock items ship within 1 business day
Description
This is a mid power clone of the Estes Executioner, with 66mm heavy wall airframe and payload tubes, a 29mm heavy wall motor mount, laser cut 1/8 inch birch plywood centering rings, bulkhead, and through-the-wall fins. Recovery with a 24 inch parachute and 12 ft of 400 lb Kevlar shock cord. Also includes 29mm 3D printed motor retainer. This is currently an early prototype model, so product documentation and design files are not yet available.
Recommended Motors
Coming soon.
Product Documentation
Coming soon.
Simulation Files
 |
Mid Power Executioner Design File (TBD) |
Videos
View AllClose
Related Products
Mid-Cure 15 Minute Epoxy
Bob Smith Industries
$13.99
This is the Goldilocks Momma Bear of BSI's 5-15-30 minute epoxy lineup, giving a moderate working time of approximately 10-15 minutes before it cures, which gives enough time to apply to a moderate...
BSI-MCE
Out of Stock
Executioner
Estes
MSRP:
$34.99
$27.92
Standing over 3 feet tall and 2.6 inches wide, the Executioner will turn heads! This model can fly low and slow on 24mm D12 motors, top 700 feet on E9 and E12 motors. But with its sturdy...
EST-1951
Antares Mid-Power Launch Controller
Rocketry Works
$84.99
A sturdy low to mid power launch controller is built to launch all day and ignite clustered igniters quickly and completely; that's what Antares brings to the launch range. The Antares launch...
RW-LG-ANTARES
3D Printed Mid Power 1010 Launch Rail Guides (1 pair)
Rocketry Works
$0.59
These 3D printed mid power rail guides feature Rocketry Works' unique mounting system that works with either wood glue or epoxy! These will stick well to a rough paper paper tube, so you may...
RW-RAIL-GUIDE
H13ST-P (Plugged) 29mm DMS High Power Single Use Motor
Aerotech
MSRP:
$49.99
$47.49
1 pack of Aerotech H13ST-P DMS High Power Single Use Motor. This low thrust long burning motor is plugged, so it does not include a delay or ejection charge. You must use electronic ejection...
AT-081300
