Rocketry Works
Bull Pup fins for BT-80 (Set of 8)
- SKU:
- RW-FIN-BULL-PUP-3MM-PLY-TTW-29MM-66MM
- Availability:
- Available in limited quantities while prototyping
Description
These upscale Bull Pup fins fit a 17.5 inch long BT-80 airframe tube to produce a nice scale model of the Bull Pup air to surface missile from the late 1960s. Through the Wall fins require a slotted airframe tube to secure the fin tab to the motor tube while securing the root edge of the fin tothe airframe tube. the result is a very strong fin joint. Works with Rocketry Works' Tail Cone for 29mm in BT-80 and the Tube Slotting and Cutting Guide.
Related Products
Plywood Trapezoidal Fins TTW fits 24mm in BT-80 (Set of 3)
Rocketry Works
$7.99
Save yourself the trouble of cutting your own plywood fins with thee customizable sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on...
RW-24MM-BT-80-TTW-3MM-TRAP-FIN
Plywood Trapezoidal Fins TTW fits 29mm in BT-80 (Set of 3)
Rocketry Works
$7.99
Save yourself the trouble of cutting your own plywood fins with thee customizable sturdy through-the-wall (TTW) 1/8 inch thick laser cut plywood fins. The trapezoidal shape fins resist breakage on...
RW-29MM-BT-80-TTW-3MM-TRAP-FIN
66mm (BT-80) Bulkhead
Rocketry Works
$1.99
These laser cut bulkheads are made from 1/8 inch birch plywood, and sized to fit securely at one end of a 66mm (BT-80) coupler, and inside a BT-80 body tube. Sold as a set of 2 bulkhead plates, one...
RW-BULKHEAD BT-80 PW 3MM
Tail Cone for 29mm in BT-80
Rocketry Works
$5.99
This ABS plastic tail cone includes an aft centering ring for a 29mm thin wall motor mount and 4 1/8 inch slots to allow through-the wall fins. Some sanding of the centering ring and the fin slots...